landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Pedal Positioning Switch > < Front Inner Parking Aid Sensor|Page 1052
Page 1
background image

Parking Assist Distance Sensor: Service and Repair
Rear Outer Parking Aid Sensor

Rear Outer Parking Aid Sensor

Removal

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

1. Raise and support the vehicle.
2. Remove the parking aid sensor.

^

Disconnect the electrical connector.

^

Release the 2 clips.

3. Remove the parking aid sensor trim panel.

^

Release the 3 clips.

Installation

1. To install, reverse the removal procedure.

Pedal Positioning Switch > < Front Inner Parking Aid Sensor|Page 1052