LR3 (LA) V8-4394cc 4.4L (2005)
Oil Temperature Sensor/Switch: Service and Repair
Oil Temperature Sensor
Service Repair No - 12.60.65
Removal
1. Disconnect the battery ground cable.
2. Remove the radiator access panel.
^
Remove the 4 bolts.
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open connections
to prevent contamination.
3. Remove the oil temperature sensor.
^
Disconnect the electrical connector.
^
Position a container to collect the fluid.
Installation
1. To install, reverse the removal procedure.
^
Tighten the oil temperature sensor to 20 Nm (15 ft. lbs.).
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
2. Check and top-up the engine oil.