Range Rover P38
12
ENGINE
NEW RANGE ROVER
10
REPAIR
46. Release feed pipe clip from bracket. Place pipe
aside.
47. Disconnect multiplug from gearbox oil
temperature sensor.
48. Disconnect 2 pipes from air conditioning
condenser. Remove ’O’ rings and discard.
49. Disconnect 2 pipes from air conditioning
compressor. Remove ’O’ rings and discard.
Place pipes aside.
50. Remove 2 nuts and bolts securing radiator
mountings to chassis.
51. With assistance, raise radiator assembly for
access to condenser cooling fan connections.
52. Disconnect 2 condenser cooling fan multiplugs.
53. With assistance, remove radiator/condenser/oil
cooler assembly.
Manual Vehicles:
54. Clamp clutch flexible hose using an approved
brake hose clamp.
55. Remove clip securing flexible hose to gearbox
bracket.
56. Disconnect clutch flexible hose at gearbox pipe.
Position hose aside.
Automatic Vehicles:
57. Remove window switch pack.
See
ELECTRICAL, Repair.
Manual Vehicles:
58. Remove centre console.
See CHASSIS AND
BODY, Repair.
59. Remove 6 nuts securing gaiter ring. Remove
ring and gaiter.
60. Remove 2 bolts securing gear lever. Remove
lever.
All Vehicles:
61. Release handbrake. Release handbrake cable
clevis pin.
