Range Rover P38
26
COOLING SYSTEM
NEW RANGE ROVER
4
REPAIR
VISCOUS COUPLING AND FAN ASSEMBLY - UP
TO 99MY
Service repair no - 26.25.19
Special tools:
LRT-12-093
LRT-12-094 - Viscous coupling removal
Remove
1. Disconnect battery negative lead.
2. Release 2 clips securing cooling fan upper cowl.
Remove cowl.
3. Using LRT-12-093 and LRT-12-094 unscrew
viscous coupling from water pump.
NOTE: Viscous coupling is secured with a
RH thread.
4. Remove fan and coupling assembly.
Do not carry out further dismantling if component
is removed for access only.
5. Remove 4 bolts securing coupling to fan.
Remove coupling.
Refit
6. Ensure mating faces are clean.
7. Fit fan to coupling. Secure with bolts. Tighten to
24 Nm (18 lbf.ft)
8. Using LRT-12-093 and LRT-12-094, fit fan
assembly to pump. Tighten to
56 Nm
(41 lbf.ft.)
9. Fit cooling fan upper cowl. Secure with clips.
10. Reconnect battery negative lead.
