landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

CORROSION PROTECTION > < MATERIALS GUIDE
Page 1027
background image

77

PANEL REPAIRS

NEW RANGE ROVER

12

SEALING AND CORROSION PROTECTION

3M Flexible Parts Repair Material 05900
A fast-curing, two-part system for repairing minor
damage to plastic bumpers, spoilers, valances etc.
Dries in 30 mins.

Supplied as two-pack 320 ml (10 fl oz) kit.

3M Weld Thru’ SEALER 08625
For anti-corrosion protection between spot welded
panels. Brush application.

Supplied in 1-litre (1.76 pt) canisters.

3M Bodygard
Rubber-based, stone chip protective coating for
panels. Fast drying, low bake compatible and may be
overpainted. Varying textures obtainable depending
on type of finish required. Available in black (1-litre
[1.76 pt] pack 08858, aerosol 08158) or grey (1-litre
[1.76 pt] pack 08859, aerosol 08159).

3M Inner Cavity Wax
For protective coating on inner panels. Excellent
anti-corrosion properties. Available in transparent or
amber consistencies, and 1-litre (1.76 pt) canister or
500 ml (0.88 pt) aerosol packs.

3M Zinc Spray 09113
Anti-corrosive coating for spot welding applications on
joints and seams. Supplied in 500 ml (0.88 pt) aerosol
packs.

3M Waterproof Cloth Tape YS3998
Black waterproof tape for sealing door apertures and
body box section access holes. Long-lasting,
moisture-resistant adhesive will withstand immersion
in water.

Supplied in 50-metre (164.2 ft) rolls in a variety of
widths.

3M Adhesive Cleaner and Wax Remover 08984
For surface preparation before application of most
types of adhesive, coating and sealant, also for
removal of tar, silicone polish, wax, grease and oil.
Non-staining. May also be used for cleaning adhesive
remnants from sander disc backing pads.

Supplied in 1-litre (1.76 pt) canisters.

CORROSION PROTECTION > < MATERIALS GUIDE