Range Rover P38
SEATS
17
REPAIR
8. Release 4 clips securing cover to frame.
9. Remove cushion and cover from frame. Fold
back cover.
10. Remove 13 hog rings securing cover to cushion.
Remove cover.
NOTE: Heating element is part of cushion.
Refit
11. Position cover on cushion. Fit hog rings.
12. Position cushion assembly to frame. Secure with
clips and retainers.
13. Fit seat slides to cushion frame. Secure with
screws. Tighten to
30 Nm. (22 lbf.ft)
14. Fit cushion to seat. Secure with bolts.
15. Connect headrest/recline multiplug.
16. Connect squab cover retainer to cushion frame.
Position cover trim. Secure with clips.
17. Fit valance to cushion. Secure with screws. Fit
screw covers.
18. Fit front seat.
See this section.
