Range Rover P38
80
HEATING AND VENTILATION
NEW RANGE ROVER
12
REPAIR
POLLEN FILTER
Service repair no - 80.15.42
Remove
1. Remove 2 screws securing each pollen filter
cover.
2. Remove pollen filter covers.
3. Remove pollen filters.
Refit
4. Reverse removal procedure.
PIPE - HEATER - FEED
Service repair no - 80.25.07
Remove
1. Remove heater return pipe.
See this section.
2. Release clip securing heater feed hose to heater
feed pipe and disconnect hose from pipe.
3. Remove nut securing heater feed pipe to plenum
chamber.
4. Press quick release connector and release
heater feed pipe from plenum chamber.
5. Remove and discard ’O’ ring from pipe.
Refit
6. Fit new ’O’ ring to heater feed pipe and lubricate
with castor oil.
7. Secure heater feed pipe to plenum chamber.
8. Fit and tighten nut securing heater feed pipe to
plenum chamber.
9. Connect heater feed hose to heater feed pipe
and secure with clip.
10. Fit heater return pipe.
See this section.