Workshop Manuals Factory service & repair Land Rover
01 General and service information02 Engine03 Fuel, emissions and engine management04 Cooling system05 Manifolds and exhaust06 Transmission and axles07 Steering and suspension08 Brakes09 Wheels and tyres10 Body, trim and restraints11 Heating and air conditioning12 Electrical and instruments
Land Rover Range Rover Classic Technical Bulletins10 · Body, trim and restraints
10 · Body & interior

SRS parts replacement policy

Make
Land Rover
Model
Range Rover Classic Technical Bulletins
Section
SRS parts replacement policy › SRS parts replacement policy
Body, trim and restraintsSRS parts replacement policy

SRS PARTS REPLACEMENT POLICY

Model
Range Rover Discovery
Affected vehicles
All derivatives with factory fitted SRS
Date
1994-06-08
Reference
08/06/94
Srs Parts Replacement Policy – bulletin page 1

Bulletin text

SUBJECT Supplementary Restraint System (SRS) Parts Replacement-Policy

MODEL AFFECTED VEHICLES

Range Rover Discovery All derivatives with factory fitted SRS

DETAIL

All SRS components are considered traceable and therefore if any part is replaced replaced a record of this change must be noted in the SRS section of the Owners Service Record Booklet. Record the date of repair, part number and any part bar code number, likewise, this information should be appended to the vehicle history/job card retained at the servicing/repairing dealer.

ACTION REQUIRED

Refer to the information given above.

PARTS INFORMATION

Applicable to all SRS components.

PROCEDURE

Record all SRS component changes in the SRS section of the Service Record Book and job card.

Include part number, date of repair and bar code numbers from the new part.

Do not interchange SRS components between vehicles.

08/06/94

01/12/94/EN

WARRANTY

For information only.

COMP. CODE

Not applicable

SRO

Not applicable.

Parts & tools for this job For Land Rover Range Rover

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.