Serpentine drive belt
- Make
- Land Rover
- Model
- Range Rover Classic Technical Bulletins
- Section
- Serpentine drive belt › Serpentine drive belt
SERPENTINE DRIVE BELT
- Model
- Range Rover Discovery
- Affected vehicles
- All Range Rover and Discovery V8 petrol derivatives from VIN LH 647645 and LJ 081991
- Date
- 1994-03-11
- Reference
- 11/03/94
Bulletin text
Serpentine Drive Belt
MODEL AFFECTED VEHICLES
Range Rover All Range Rover and Discovery V8 petrol derivatives Discovery from VIN LH 647645 and LJ 081991
DETAIL
A new front end drive drive belt belt system has been introduced from the above VIN numbers (Known as 95 Model Year in some markets). The new system consists of a single serpentine belt which replaces the 'multi' belt drive seen on previous models. This change also introduces a new front cover assembly including new oil pump, water pump and ZF power steering pump. The serpentine belt is automatically tensioned and should not require adjustment during the course of its life.
ACTION REQUIRED
Check condition of drive belt at 24,000 mile (40,000 Km) service intervals. Replace drive belt at 96,000 mile (160,000 Km) service intervals.
PARTS INFORMATION
Serpentine belt: With air-conditioning ERR 4623 Non air-conditioning ERR 4461
PROCEDURE
Refer to the workshop manual section 10 and 12 for maintenance and removal instructions.
11/03/94
12/03/94/EN
WARRANTY
Normal warranty policy and procedure applies.
COMP. CODE
2G4
SRO
Range Rover and Discovery. 86.10.03 Renew drive belt 00.25 hour
Parts & tools for this job For Land Rover Range Rover
- PARTEngine gasket setSearch: Land Rover Range Rover engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.