Tyre pressures-new vehicles
- Make
- Land Rover
- Model
- Range Rover Classic Technical Bulletins
- Section
- Tyre pressures-new vehicles › Tyre pressures-new vehicles
TYRE PRESSURES-NEW VEHICLES
- Model
- Range Rover
- Affected vehicles
- All Range Rover derivatives
- Date
- 1993-02-04
- Reference
- 04/02/93
Bulletin text
Tyre Pressures - New Vehicles
MODEL AFFECTED VEHICLES
Range Rover All Range Rover derivatives
DETAIL
A number of Product Reports have been received which detail over inflated tyres when new vehicles are delivered to the dealer. This bulletin is raised to remind the dealer network that it is Land Rover policy to increase tyre pressures above the normal level, from recommended pressures to approximately 50 lbf/in²3.45 bar-3.5 Kgf/cm² during transit between factory and Dealer to prevent flat spotting of the tyres resulting from possible extended periods without movement. During Pre-delivery inspection all tyre pressures inclusive of the spare wheel must be checked and adjusted to the correct pressures. Reference should be made to the vehicle Handbook to determine correct pressures for the size and make of tyre.
ACTION REQUIRED
For information only. Check tyre pressures during Pre-delivery inspection and adjust as necessary
PARTS INFORMATION
Not applicable.
PROCEDURE
Tyre pressures:- All markets except North America. 205 R16 Radial - Normal-all load conditions:100 inch chassis models as shown. 108 inch chassis models, rear tyre pressures increase to 38 lbf/in²-2.6 bar-2.8 Kgf/cm²
Front Rear 1,9 bar 2,4 bar 28 lbf/in² 35 lbf/in² 2,0 Kgf/cm² 2,6 Kgf/cm²
Tyre pressures:- North America only 100/108 inch models
Front Rear 1.9 bar 2.6 bar 28 lbf/in² 38 lbf/in² 2.0 Kgf/cm² 2.8 Kgf/cm²
04/02/93
74/05/94/EN
Parts & tools for this job For Land Rover Range Rover
- TOOLTyre pressure gaugeSearch: digital tyre pressure gauge
- TOOLTorque wrenchSearch: 1/2 inch torque wrench
- TOOLBreaker barSearch: breaker bar
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.