Range Rover (LH) V8-3.9L (1989)
Cruise Control Switch: Service and Repair
Master Switch
REMOVE
1. Disconnect the battery negative lead.
2. Carefully pry the auxiliary switch panel surround away from the center console.
3. Withdraw the switch panel as far as the electrical leads will permit.
4. Unclip the multi-plugs at the rear of the switches by depressing the retaining lugs.
5. Pull the plugs from the switches.
6. Remove the switch panel complete.
7. Depress the small retaining lugs on the top and bottom of the switch and push the switch through the front of the switch surround.
REFIT
1. Reverse the removal procedure.