Range Rover (LH) V8-3.9L (1989)
Wiper Switch: Service and Repair
REMOVE
1. Remove the steering column shroud from the required side.
Clips
Harness Connector
2. Release the appropriate retaining clip and pull the fibre optic guide from the housing.
3. Depress the retainers at the top and bottom of the switch and pull combined switch assembly away from the steering column switch housing.
4. Lighting, indicator and horn switch: release the two harness multi-plugs from the back of the switch and remove the switch assembly.
5. Wiper and washer switch: release the harness multi-plug from the back of the switch and remove the switch assembly.
REFIT
1. Reverse the removal procedure.