Range Rover (LH) V8-3.9L (1989)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Spring
CAUTION: During the following procedure avoid over stretching the brake hoses. If necessary, loosen the hose connector locknuts to allow the hoses
to follow the axle.
REMOVE
-
Remove the front shock absorber.
-
Lower the axle sufficient to free the road spring.
Road Spring
-
Withdraw the road spring (3).
-
Withdraw the shock absorber bracket securing ring (4).
REFIT
-
Fit the shock absorber bracket retaining ring (4). Retain in position with a nut (5).
-
Refit road spring and raise axle into position.
-
Remove the nut retaining the securing ring.
-
Fit the front shock absorber.