Range Rover (LM) V8-4.2L SC (2006)
Ultrasonic Sensor: Service and Repair
Intrusion Sensor
Removal
1. Remove the center overhead console.
^
Carefully release the 3 clips.
^
Disconnect the 3 electrical connectors.
2. Remove the intrusion sensor and module from the center overhead console.
^
Release from the 2 clips.
Installation
1. Install the intrusion sensor and module to the center overhead console.
^
Secure in the 2 clips.
2. Install the center overhead console.
^
Connect the electrical connectors.
^
Secure the clips.