Range Rover (LM) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1606010.png)
29. Position the A/C compressor to the engine.
^
If a new compressor is being installed, the required amount of refrigerant oil must be drained from it.
30. Install the A/C compressor mounting bracket.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
31. Secure the A/C compressor.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
32. Connect the A/C clutch electrical connector.
CAUTION: Lubricate the new seals with clean refrigerant oil.
33. Connect the refrigerant lines.
^
Clean the component mating faces.
^
Install the new O-ring seals.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
34. Install the oil level indicator and tube.
35. Install the accessory drive belt.
36. Install the accessory drive belt tensioner.
^
Tighten the bolt to 40 Nm (30 ft. lbs.).
37. Install the cooling fan drive hub bearing.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
38. Install the cooling fan pulley.
^
Tighten the bolts evenly to 25 Nm (18 ft. lbs.).
39. Secure the accessory drive belt.
40. Install the cooling fan belt.
^
Tighten the cooling fan belt tensioner bolt to 40 Nm (30 ft. lbs.).
^
Rotate the cooling fan belt tensioner clockwise.
41. Install the cooling fan.
42. Connect the battery ground cable.
