Range Rover (LM) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-141002.png)
NOTE:
IDS must be loaded with software release DVD118 Patch File 1 or later.
2. Connect the IDS to the vehicle and begin a new diagnostic session by entering the correct VIN for the current vehicle.
3. Follow the IDS prompts to read the vehicle configuration.
4. Select 'No' when prompted 'Do you wish to read diagnostic trouble codes?'
5. Select 'tick' to continue.
6. Select the 'Vehicle Configuration' tab when Content Model is displayed.
7. From the Vehicle Configuration menu, configure the 'Engine control module' by selecting from the drop-down menu: 'Module programming' >
'Configure existing module' > 'Petrol powertrain control module'
8. Select 'tick' to continue, following all on-screen instructions to complete this task.
^ IDS will return to the Vehicle Configuration menu when completed.
9. From the Vehicle Configuration menu, configure the 'Transmission control module' by selecting from the dropdown menu: 'Module programming' >
'Configure existing module' > 'Transmission control module'
10. Select 'tick' to continue, following all on-screen instructions to complete this task.
11. Exit the current session.
12. Disconnect IDS and the Midtronics PSC-550 Vehicle Power Supply from the vehicle.
