landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Airbag Module - Head - Front|Page 6877 > < Repairs and Inspections Required After a Collision|Service and Repair
Page 1
background image

Air Bag: Service and Repair
Airbag Module - Head - Front

76.74.40 Airbag Module - Head - Front

Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.

WARNING:

^

It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.

^

Always disconnect both battery leads before beginning work on the SRS system. Disconnect the negative lead first. Never reverse connect
the battery.

Remove

1. Make the SRS system safe.
2. Remove fascia carrier.
3. Remove sun visor.
4. Remove grab handles.
5. Release door aperture seals to release headlining.
6. Remove 'B' post upper finisher.
7. Release 'D' post upper finisher.
8. Remove 'E' post finisher.
9. Remove rear console from headlining.

10. Remove 2 screws securing headlining.
11. Carefully lower edge of headlining for access to airbag fixings.

12. Remove 2 Torx screws securing airbag to 'A' post.
13. Remove Torx screw securing airbag webbing to 'A' post.

Airbag Module - Head - Front|Page 6877 > < Repairs and Inspections Required After a Collision|Service and Repair