Range Rover (LM) V8-4.4L (2009)
Ultrasonic Sensor: Service and Repair
Intrusion Sensor
Removal
1. Remove the center overhead console.
-
Carefully release the 3 clips.
-
Disconnect the 3 electrical connectors.
2. Remove the intrusion sensor and module from the center overhead console.
-
Release from the 2 clips.
Installation
1. Install the intrusion sensor and module to the center overhead console.
-
Secure in the 2 clips.
2. Install the center overhead console.
-
Connect the electrical connectors.
-
Secure the clips.