landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Driver/Vehicle Information Display|General|Page 6292 > < Driver/Vehicle Information Display|General|Page 6290
Page 1
background image

Driver/Vehicle Information Display: Description and Operation
Ambient Temperature

Ambient Temperature

The external ambient air temperature is measured by a sensor located behind the Land Rover badge on the front grille and is connected directly to the
instrument cluster.

The ambient temperature sensor is an NTC sensor whose resistance falls as the ambient temperature increases. The instrument cluster outputs a reference
voltage of 5.1 V to the sensor. The instrument cluster processor evaluates the returned signal and converts the information into a temperature value and
displays the appropriate temperature in the message center. The temperature display can be adjusted by T4 to be displayed in either Celsius or
Fahrenheit, dependent on market requirements. This can also be changed by the driver using the 'Settings' screen in the TSD.

The instrument cluster continuously transmits the ambient temperature signals on the CAN for use by other systems, when the ignition is on. When the
vehicle is stationary, the signal output is suspended until the vehicle speed reaches 12 mph (20 km/h) to prevent incorrect readings from heat emitted
from the engine compartment. When the ignition is off there is no temperature output.

The sensor is capable of reading temperatures in the range of -45 degrees C (-49 degrees F) to +56 degrees C (+132.8 degrees F). The instrument
cluster message center will display minimum temperatures to -40 degrees C (-40 degrees F) and maximum temperatures to +50 degrees C (+122
degrees F)
.

If the temperature falls to 4 degrees C (39.2 degrees F) or below, the instrument cluster generates a message when the ignition is on. The instrument
cluster displays the message, 'EXTERNAL TEMPERATURE', with the recorded temperature alongside. The instrument cluster also emits a single chime
from the sounder to alert the driver to the warning message. The display time of the message is between 6 and 15 seconds, dependant on other displayed
messages.

Ambient Temperature Sensor Resistance/Temperature Values

Temperature

Resistance

40 degrees C (-40 degrees F)

168.250 kOhm

-30 degrees C (-22 degrees F)

88.500 kOhm

-20 degrees C (-4 degrees F)

48.535 kOhm

-10 degrees C (+14 degrees F)

27.665 kOhm

0 degrees C (+32 degrees F)

16.325 kOhm

+10 degrees C (+50 degrees F)

9.9500 kOhm

+20 degrees C (+68 degrees F)

6.2450 kOhm

+30 degrees C (+86 degrees F)

4.0285 kOhm

+40 degrees C (+104 degrees F)

2.6633 kOhm

+50 degrees C (+122 degrees F)

1.8015 kOhm

Driver/Vehicle Information Display|General|Page 6292 > < Driver/Vehicle Information Display|General|Page 6290