Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2064011.png)
Pressing the on-board computer button (I) on the LH steering column multifunction switch displays the first selected trip display in the sequence. With
each subsequent press of the button, the next trip information in the sequence is displayed. The displayed information can be programmed by the driver
using the TSD and scrolled through continuously to reach the desired information. One or more of the available trip information selections can be
displayed.
When all of the trip displays have been scrolled through once, the message center appears blank, signifying the end of the trip display. When the trip
information is subsequently requested, the message center will display the first function in the sequence. If the function display is interrupted by a system
message from the LCM, when the steering column multifunction switch button is pressed or the check control button is pressed, the last displayed trip
information will reappear in the message center.
The following list shows the possible on-board computer trip information and their standard sequence of display. This order will be reinstated after a
system reset.
^
TIME
^
DATE
^
CONSUMPTION 1
^
CONSUMPTION 2
^
TANK RANGE
^
SPEED WARNING
^
AVERAGE SPEED.
On-Board Computer Functions with Touch Screen Display
The on-board computer functions are accessed on the TSD by pressing the 'On-Road Information button' on the left hand side of the TSD. After pressing
this button the last displayed screen in the on-road information selection appears in the TSD. The following screens are available in the on-road
information screen:
^
FUEL AND TEMPERATURE Fuel Consumption 1 Fuel Consumption 2 Tank Range External Temperature
^
Fuel Consumption 1
^
Fuel Consumption 2
^
Tank Range
^
External Temperature
^
SPEED Speed Warning Average Speed
^
Speed Warning
^
Average Speed
^
STOPWATCH Stopwatch and Lap Timer
^
Stopwatch and Lap Timer
^
TRIP SETTINGS Selections for message center display.
^
Selections for message center display.
Each of the screens have four buttons along the bottom of the screen which allow the user to change screens.
Fuel and Temperature Screen
The Fuel and Temperature screen shows the figures recorded against the fuel consumption 1 and 2, the remaining distance calculated from the fuel tank
level (tank range) and the external temperature.
The two fuel consumption readings allow the driver to set fuel consumption for different journeys, e.g. fuel consumption 1 can be reset at the start of
