Range Rover (LM) V8-4.4L (2009)
Entertainment System Control Panel: Service and Repair
Rear Passenger Entertainment Control Panel
Removal
1. Remove the register.
2. Remove the rear floor register.
-
Release the 4 clips.
3. Disconnect the 5 electrical connectors.
4. Remove the floor console rear trim panel.
-
Remove the 4 screws.
NOTE: Do not disassemble further if the component is removed for access only.
5. Remove the rear passenger entertainment control panel.
-
Remove the 3 screws.
Installation
1. Install the rear passenger entertainment control panel.
-
Install the 3 screws.
2. Install the floor console rear trim panel.
-
Install the 4 screws.
3. Connect the 5 electrical connectors.
4. Install the rear floor register.
-
Secure the 4 clips.
5. Install the register.