Range Rover (LM) V8-4.4L (2009)
Speaker: Service and Repair
Tailgate Speaker
Tailgate Speaker
Removal
1. Remove the tailgate trim panel.
2. Remove the tailgate speaker assembly.
-
Remove the 10 Torx bolts.
-
Disconnect the 2 electrical connectors.
NOTE: Do not disassemble further if the component is removed for access only.
3. Remove the tailgate speaker.
-
Remove the 6 bolts.
Installation
1. Install the tailgate speaker.
-
Tighten the bolts to 10 Nm (7 lb.ft).
2. Install the tailgate speaker assembly.
-
Connect the electrical connectors.
-
Tighten the Torx bolts to 10 Nm (7 lb.ft).
3. . Install the tailgate trim panel.