Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2201002.png)
7. Release the front bumper cover from the front fenders.
^
Release from the 2 clips.
8. With assistance, remove the front bumper cover.
^
Disconnect the 6 electrical connectors.
^
Release the clip and disconnect the washer jet hose.
9. NOTE: Do not disassemble further if the component is removed for access only.
If installed, remove the license plate.
10. If installed, remove the license plate panel.
^
Remove the 5 screws.
11. Remove the front fog lamp bezel.
^
Release the 5 clips.
^
Repeat the above procedure for the other side.
