Range Rover (LM) V8-4.4L (2009)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Cover
Service Repair No - 76.22.74
Removal
1. CAUTION: Protect the paintwork during this operation.
Remove the rear bumper cover trim panel.
^
Release the 7 clips securing the rear edge of the rear bumper cover trim panel.
^
Open the tailgate.
^
Release the 12 clips securing the front edge of the rear bumper cover trim panel.
2. Release the rear fender splash shield from the rear bumper cover.
^
Remove the 2 clips.
^
Remove the 4 screws.
3. Release the rear bumper cover lower section.
^
Remove the 5 screws.
4. With assistance, remove the rear bumper cover.
^
Remove the 5 screws.
^
Release the 6 clips.
^
Disconnect the 4 electrical connectors to the rear parking aid sensors.