Range Rover (LM) V8-4.4L (2009)
Trunk / Liftgate Striker: Adjustments
Liftgate Striker Adjustment
Service Repair No - 76.37.28
1. Check for an equal gap and alignment to the adjacent panels. If incorrect, follow the adjust procedure below.
2. Remove the tailgate upper trim panel.
^
Remove the 6 screw covers.
^
Remove the 6 screws.
3. Loosen the 2 screws securing the liftgate striker.
4. Close the liftgate and check for an equal gap and alignment to the adjacent panels.
5. Open the liftgate.
^
Tighten the screws to 10 Nm (7 ft. lbs.).
6. Install the tailgate upper trim panel.
^
Install the screws.
^
Install the screw covers.