Range Rover (LM) V8-4.4L (2009)
30. Disconnect the 4 electrical connectors and remove the audio unit.
31. NOTE: LHD illustration shown, RHD is similar.
Release the central junction box (CJB) from the in-vehicle crossbeam.
^
Release the 2 relays from the passenger side of the in-vehicle crossbeam.
^
Release the wiring harness clip.
^
Remove the 4 screws.
^
Reposition the CJB assembly for access.
32. NOTE: LHD illustration shown, RHD is similar.
Release the wiring harness carrier from the in-vehicle crossbeam.
^
Remove and discard the tie-strap.
33. Remove the 2 nuts from the heater and evaporator core housing to the in-vehicle crossbeam.
34. Release the in-vehicle crossbeam from the bulkhead.
^
Remove the 4 nuts.
^
Remove the 2 bolts.
35. Reposition the in-vehicle crossbeam for access.