Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2268002.png)
8. Release the catalyst monitor sensor wiring harness.
^
Release the 4 clips.
9. With assistance, remove the transmission support crossmember.
^
Remove the 4 bolts and washers.
^
Noting fitted position, remove the 4 spacers.
^
Noting fitted position, remove the 2 transmission support insulator buffers.
10. NOTE: Do not disassemble further if the component is removed for access only.
Remove the transmission support crossmember damper.
^
Remove the nut and bolt.
