Range Rover (LM) V8-4.4L (2009)
Arm Rest: Service and Repair
Seat Armrest
Seat Armrest
Service Repair No - 78.10.01
Removal
1. Reposition the front seat for access.
1. Reposition the seat armrest to the central position.
2. Apply suitable protective tape around the seat armrest.
2. CAUTION: Make sure no damage is caused to the seat trim when removing the seat armrest.
Remove the seat armrest
^
Remove the T27 Torx bolt.
Installation
1. CAUTION:
^
Make sure no damage is caused to the seat trim when installing the seat armrest.
^
Make sure the seat armrest bolt is fully seated.
Install the seat armrest.
^
Align the seat armrest.
^
Install the T27 Torx bolt and tighten to 25 Nm (18 ft. lbs.).
2. Reposition the front seat to the original position.
^
Remove the suitable protective tape from around the seat armrest.
^
Reposition the seat armrest to the original position.