Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2280001.png)
Console: Service and Repair
Floor Console Cup Holder
Floor Console Cup Holder
Removal
1. Disconnect the battery ground cable.
2. Remove the floor console upper panel.
3. Remove the floor console cup holder.
^
Remove the 6 screws.
Installation
1. Install the floor console cup holder.
^
Install the 6 screws.
2. Install the floor console upper panel.
3. Connect the battery ground cable.
Floor Console Extension
Floor Console Extension
Removal
1. Remove the LH floor console extension.
^
Remove the screw.
^
Release the 2 clips.
2. NOTE: Do not disassemble further if the component is removed for access only.
Remove the floor console extension trim panel.
^
Remove the rubber isolator.
^
Remove the 6 screws.
^
Remove the 2 clips.
