Range Rover (LM) V8-4.4L (2009)
5. Remove the overhead console blanking trim.
^
Release the 4 clips.
6. Release the tire pressure monitoring system receiver.
7. Remove the cellular phone microphone.
^
Release the 3 clips.
8. Remove the 4 clips from the overhead console.
Installation
1. Install the 4 clips to the overhead console.
2. Install the cellular phone microphone.
^
Secure the 3 clips.
3. Secure the tire pressure monitoring system receiver.
4. Install the overhead console blanking trim.
^
Secure the 4 clips.
5. Install the roof opening panel switch.
^
Secure in the 2 clips.
6. Install the front interior lamp.
^
Secure the 2 clips.
7. Install the overhead console.
^
Connect the 4 electrical connectors.
8. Secure the overhead console.
^
Secure the 6 clips.
^
Install the 2 screws.
^
Close the sunglasses compartment.
Floor Console
Floor Console
Service Repair No - 76.25.01
Removal
1. Disconnect the battery ground cable.
2. Remove the LH front seat.
3. Remove the LH floor wiring harness trim panel.
^
Remove the 2 clips.