landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Floor Console Cup Holder|Page 7074 > < Floor Console Cup Holder|Page 7072
Page 9
background image

16. Remove the floor console stowage compartment.

^

Open the floor console stowage compartment lid.

^

Remove the 2 screws.

^

Carefully release the 2 clips.

^

Disconnect the cigar lighter electrical connector.

17. CAUTION:  Make sure damage does not occur to the vehicle trim when removing the centre console side finisher trim panel.

NOTE:  Left-hand shown, right-hand similar.

Remove the center console LH side finisher trim panel
^

Using a suitable tool, carefully release the 3 clips.

18. CAUTION:  Make sure damage does not occur to the vehicle trim when removing the centre console side finisher trim panel.

Remove the center console RH side finisher trim panel.
^

Using a suitable tool, carefully release the 3 clips.

19. Reposition the floor console upper panel.

^

Remove the 4 screws.

^

Using a suitable tool, carefully release the 4 clips.

20. Disconnect the parking brake switch electrical connector.

Floor Console Cup Holder|Page 7074 > < Floor Console Cup Holder|Page 7072