Range Rover (LM) V8-4.4L (2009)
9. Remove the floor console upper panel.
^
Release the 3 wiring harness clips.
^
Disconnect the 3 electrical connectors.
10. NOTE: Do not disassemble further if the component is removed for access only
Remove the floor console cup holder.
^
Remove the 6 screws.
11. Remove the parking brake switch.
^
Remove the parking brake switch trim panel.
^
Remove the 2 screws.
12. Remove the upper floor console stowage compartment
^
Remove the 4 screws.
13. Remove the ride and handling optimization switch assembly.