Range Rover (LM) V8-4.4L (2009)
10. Remove the headlamp bracket.
^
Open the 2 screw covers.
^
Remove the 2 screws.
^
Repeat the above procedure for the remaining bracket.
11. Remove the hood safety catch striker plate.
^
Release the 2 clips.
Installation
1. Install the hood safety catch striker plate.
^
Secure with the clips.
2. Install the headlamp brackets.
^
Tighten the screws.
^
Close the covers.
3. Install the hood latches.
^
Install the cover.
^
Tighten the screws.
4. Install the hood latch panel.
^
Align the hood latch panel.
^
Secure the clip.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Secure the radiator assembly.
^
Install the screws.
6. Attach the hood release cable.
^
Close the cover.
^
Secure with the clips.