Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2352001.png)
Head Rest: Service and Repair
Front Seat Head Restraint Motor
Front Seat Head Restraint Motor
Removal
WARNING:
^
Persons working on the supplemental restraint system (SRS) must be fully trained and have been issued with the safety guidelines.
^
Allow a period of 10 minutes to elapse after disconnecting the battery before undertaking any work on the SRS.
^
The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
^
The correct procedures must always be used when working on SRS components.
^
It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.
^
Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse
connect the battery.
^
Take extra care when handling SRS components.
1. Disconnect the battery ground cable.
2. Make the air bag supplemental restraint system (SRS) safe.
3. Remove the front seat head restraint.
4. Remove the seat armrest.
5. Remove the front seat backrest cover upper trim panel.
^
Remove the 2 screws.
^
Release the front seat backrest cover from the front seat backrest upper trim panel.
6. Remove the front seat backrest cooling duct.
^
Remove the clip from the front seat backrest cooling duct.
7. Remove and discard the 2 clips from the front seat backrest cover.
8. Release the 2 outer tension straps from the front seat backrest.
