Range Rover (LM) V8-4.4L (2009)
^
Apply suitable protective tape around the RH head restraint guide tube.
^
Using a suitable tool, release the RH head restraint guide tube.
9. CAUTION: Make sure no damage occurs to the video display wiring harness.
NOTE: Note the position of the wiring harnesses to aid installation.
Remove the front seat head restraint.
^
Feed the front seat head restraint video wiring harness through the front seat backrest cover and the seat frame.
Installation
1. CAUTION:
^
Make sure the wiring harness is installed to its original position.
^
Make sure no damage occurs to the video display wiring harness.
Install the front seat head restraint.
^
Feed the front seat head restraint video wiring harness through the front seat backrest cover and the seat frame.
2. Secure the RH head restraint guide tube.
^
Remove the protective tape from around the RH head restraint guide tube.
3. Remove the suitable tape from the front seat head restraint post clip.
^
Secure the front seat head restraint post clip to the RH head restraint post.
4. CAUTION: Make sure the plastic insert is correctly installed to the RH head restraint post. Failure to follow this instruction may result
in damage to the vehicle.
Secure the front seat head restraint.
^
Secure the front seat head restraint to the head restraint clips.
5. Connect the front seat head restraint video display electrical connector.
^
Secure the clip.
6. Install the front seat backrest cover lower trim panel.
7. Connect the battery ground cable.
8. Reposition the front seat backrest to its original position.
^
Reposition the front seat head restraint to its original position.