Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2386011.png)
9. Install the 2 clips to the front seat backrest cover lower trim panel.
10. Install the front seat backrest hinge cover.
^
Secure the clip.
^
Install the 2 screws.
11. Install the front seat base side trim panel mounting bracket.
^
Install the 4 screws.
^
Secure the 2 wiring harness clips.
12. Install the seat control switch.
13. Install the front seat side trim panel support.
^
Secure the 2 clips.
14. Secure the 2 lower tension straps to the front seat base.
^
Reposition the front seat backrest cover.
15. Install the front seat.
16. Connect the battery ground cable.
17. Using the Land Rover approved diagnostic system, calibrate the occupant classification sensor.
