Range Rover (LM) V8-4.4L (2009)
12. Remove the rear seat backrest inner hinge.
^
Remove the 4 bolts.
^
Discard the 2 lower bolts.
13. Remove the rear seat backrest outer hinge cover.
^
Remove the 2 screws.
14. Remove the rear seat backrest from the rear seat base.
^
Remove the rear seat backrest outer hinge bolt.
15. Remove the rear seat backrest hinge wiring harness clip.
^
Remove the 2 clips.
^
Release the rear seat base wiring harness electrical connector from the rear seat backrest cover.
^
Disconnect the rear seat base wiring harness electrical connector.
16. Release the rear seat cushion cover from the rear seat base.