Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2387005.png)
Installation
1. Install the rear seat backrest cover to the rear seat backrest cushion.
^
Install the 16 new clips to the rear seat backrest cover.
2. Install the rear seat backrest cushion and cover to the rear seat backrest.
^
Reposition the safety belt.
3. Install the head restraint guide tubes.
^
Secure the 6 clips.
4. Reposition the safety belt through the rear seat backrest cushion and cover.
5. Reposition the rear seat backrest cushion and cover to the rear seat backrest.
6. Install the rear seat backrest catch trim panel.
^
Secure the 4 clips.
7. Secure the rear seat backrest cover to the rear seat backrest.
8. Install the rear seat backrest cover safety belt trim panel.
^
Install the 2 screws.
9. Reposition the safety belt through the rear seat cushion cover and the rear seat cushion.
^
Install the new safety belt bolt to the rear seat base and tighten to 31 Nm (23 ft. lbs.).
10. Secure the rear seat cushion cover to the rear seat base.
11. Install the rear seat backrest hinge wiring harness clip.
^
Secure the 2 clips.
^
Secure the rear seat base wiring harness electrical connector to the rear seat backrest cover.
^
Connect the rear seat base wiring harness electrical connector.
12. Secure the rear seat backrest to the rear seat base.
^
Install the rear seat backrest outer hinge bolt and tighten to 45 Nm (33 ft. lbs.).
13. Install the rear seat backrest outer hinge cover.
^
Install the 2 screws.
14. Install the rear seat backrest inner hinge.
^
Install the 2 upper bolts.
^
Install the 2 new lower bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
15. Install the rear seat armrest.
^
Install the bolt.
^
Reposition the rear seat armrest to the rear seat armrest hinge.
16. Secure the rear seat armrest cover to the rear seat backrest.
^
Secure the rear seat armrest cover securing strip.
^
Secure the rear seat armrest cover securing rail.
17. Reposition the rear seat armrest to the original position.
^
Secure the rear seat armrest catch.
18. Install the rear seat base lower trim panel.
^
Install the 6 clips.
^
Reposition the rear seat hinge plates for access.
19. Install the rear seat backrest inner hinge cover.
