Range Rover (LM) V8-4.4L (2009)
5. Remove the rear seat backrest inner hinge.
^
Remove the 4 bolts.
^
Discard the 2 lower bolts.
6. Remove the rear seat backrest from the rear seat base.
^
Remove the rear seat backrest outer hinge bolt.
7. Remove the rear seat backrest hinge wiring harness clip.
^
Remove the 2 clips
^
Release the rear seat base wiring harness electrical connector from the rear seat backrest cover.
^
Disconnect the rear seat base wiring harness electrical connector.
8. Release the rear seat cushion cover from the rear seat base.
9. Reposition the rear seat base wiring harness through the rear seat base.
^
Release the rear seat base wiring harness electrical connector from the clip.
^
Release the 5 wiring harness clips.
10. Reposition the safety belt through the rear seat cushion cover and the rear seat cushion.
^
Remove and discard the safety belt bolt from the rear seat base.