Range Rover (LM) V8-4.4L (2009)
8. Remove the 3 screws from the front seat backrest heater and blower motor assembly.
9. Remove the front seat backrest heater and blower motor assembly.
^
Disconnect the front seat backrest heater and blower motor assembly electrical connector.
Installation
1. Install the front seat backrest heater and blower motor assembly.
^
Connect the front seat backrest heater and blower motor assembly electrical connector.
2. Install the 3 screws to the front seat backrest heater and blower motor assembly.
3. Reposition the front seat backrest heater and blower motor assembly.
^
Secure the 2 clips.
4. Secure the front seat backrest cover RH inner tension strap.
5. Install the new clip to the front seat backrest cover.
6. Install the front seat backrest cooling duct.
^
Install the clip to the front seat backrest cooling duct.
7. Install the front seat backrest lower rear cover.
8. Connect the battery ground cable.