Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2442001.png)
Tailgate Lock Actuator: Service and Repair
Tailgate Latch Actuator
Removal
1. Remove the tailgate upper trim panel.
^
Remove the 6 screw covers.
^
Remove the 6 screws.
2. Remove the tailgate latch assembly.
3. Remove the tailgate latch actuator.
^
Release the access cover.
^
Disconnect the electrical connector.
^
Remove the bolt.
Installation
1. Install the tailgate latch actuator.
^
Tighten the bolt to 25 Nm (18 ft. lbs.).
^
Connect the electrical connector.
^
Secure the access cover.
2. Install the tailgate latch assembly.
3. Install the tailgate upper trim panel.
^
Install the screws.
^
Install the screw covers.
