Range Rover (LM) V8-4.4L (2009)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Grille
Special Service Tools
Removal
1. Remove the RH windshield moulding.
2. Remove both nut covers from the 2 windshield wiper pivot arms and remove the 2 nuts.
3. Remove both windshield wiper pivot arms from the pivot shafts.
4. Using special tool, remove and discard the windshield wiper pivot arm aluminum boss from the 2 pivot shafts.
5. Remove the 2 plastic inserts from the windshield wiper pivot arm pivot shafts.
6. Release the 2 drain tubes from the underside of the cowl panel grille.
7. Release the 4 cowl panel grille clips and reposition away from the pivot shafts.
8. Remove the cowl panel grille.
^
Reposition the cowl panel grille away from the LH windshield moulding.