Range Rover (LM) V8-44L (2009) Brake Master Cylinder Service and Repair
Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir - Vehicles With: High Performance Brakes
Brake Fluid Reservoir - Vehicles With: High Performance Brakes
Service Repair No - 70.25.31
Removal
CAUTION: If brake fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
1. Disconnect the low brake fluid warning indicator switch electrical connector.
^
Release the wiring harness
CAUTION: Make sure that all openings are sealed. Use new blanking caps.
NOTE: Position cloth to collect fluid spillage
2. Disconnect the pre-charge pump feed hose.
^
Release the clip.
CAUTION: Make sure that all openings are sealed. Use new blanking caps.
3. Remove the brake fluid reservoir.
^
Release the 2 clips
^
Remove and discard the 2 seals.