Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1490001.png)
Vacuum Pump: Service and Repair
Brake Vacuum Pump
Brake Vacuum Pump - 4.2L/4.4L
Service Repair No - 70.50.19
Removal
1. Disconnect the battery ground cable.
CAUTION: Always plug any open connections to prevent contamination.
2. Remove the brake vacuum pump.
^
Release and disconnect the electrical connector.
^
Disconnect the vacuum line.
^
Remove the 2 nuts.
NOTE: Do not disassemble further if the component is removed for access only.
3. Remove the 2 rubber insulators.
^
Remove the metal inserts.
Installation
1. To install, reverse the removal procedure.
^
Tighten the nuts to 5 Nm (4 ft. lbs).
