Range Rover (LM) V8-4.4L (2009)
Heater Core: Service and Repair
Heater Core
Removal
WARNING:
-
Persons working on the supplemental restraint system (SRS) must be fully trained and have been issued with the safety guidelines.
-
Allow a period of 10 minutes to elapse after disconnecting the battery before undertaking any work on the SRS.
-
The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
-
The correct procedures must always be used when working on SRS components.
-
It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.
-
Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse
connect the battery.
-
Take extra care when handling SRS components.
1. Set the footwell duct air outlet to closed.
2. Make the air bag supplemental restraint system (SRS) safe.
3. Disconnect the battery ground cable.
4. Remove the heater and evaporator core housing.
5. Reposition the heater and evaporator core housing for access.
6. Remove the left-hand footwell duct.
-
Remove the 2 screws.
7. Remove the left-hand air intake duct.
-
Remove the 4 screws.