Range Rover (LM) V8-4.4L (2009)
Radiator: Service and Repair
Radiator
NOTE: This article contains updated information called out in TSB TECLTB00174.
Radiator
Service Repair No - 26.40.01
1. Disconnect the battery ground cable.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Raise and support the vehicle.
3. Drain the cooling system.
4. Release the 2 coolant hoses from the cooling fan shroud.
^
Release from the 4 clips.
5. Remove the cooling fan shroud lower securing clip.
6. Lower the vehicle.
7. Release the coolant expansion tank.
^
Remove the 2 bolts.
^
Release from the clip.
^
Tie the coolant expansion tank aside.
8. If installed, release the pollution sensor.