Range Rover (LM) V8-4.4L (2009)
10. NOTE: Note the fitted position.
Remove the accessory drive belt.
11. Remove the coolant pump drive pulley.
^
Remove the 3 bolts.
12. Remove the coolant pump.
^
Remove the 5 bolts.
^
Discard the gasket.
Installation
1. NOTE: Install a new gasket.
Install the coolant pump.
^
Clean the component mating faces.
^
Tighten the 5 bolts to 10 Nm (7 ft. lbs.).
2. Install the coolant pump drive pulley.
^
Tighten the 3 bolts to 10 Nm (7 ft. lbs.).
3. Install the accessory drive belt.
4. Install the cooling fan belt tensioner.
^
Tighten the M10 bolt to 45 Nm (33 ft. lbs.).
5. Install the cooling fan drive hub bearing.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
6. Install the cooling fan drive pulley.
^
Tighten the bolts evenly to 25 Nm (18 ft. lbs.).
7. Install the cooling fan drive belt.
^
Using a 1/2 inch square drive bar, rotate the drive belt tensioner clockwise.