Range Rover (LM) V8-4.4L (2009)
6. Remove the special tool from the right-hand cylinder head.
CAUTION: Make sure that number 1 cylinder intake camshaft lobes are vertical to the cylinder head face.
7. Position the right-hand camshafts to a neutral position.
CAUTION: Make sure that number 2 cylinder exhaust camshaft lobes are vertical to the cylinder head face.
8. Position the left-hand camshafts to the neutral position.
CAUTION: Make sure no binding of the crankshaft occurs.
CAUTION: Make sure the spark plugs are removed to enable the engine to rotate freely.
9. Carefully rotate the crankshaft two complete turns to check for correct operation.
CAUTION: Do not rotate the crankshaft counter-clockwise. Rotate the crankshaft clockwise to position the engine to top dead center (TDC) No
1 cylinder
10. Install the special tool.