Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-653002.png)
^
Release the knock sensor (KS) electrical connector.
9. Using the special tool, disconnect the fuel line.
WARNING: Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors
are always present and may ignite. Failure to follow these instructions may result in personal injury.
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components.
Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
WARNING: The spilling of fuel is unavoidable during this operation. Ensure that all necessary precautions are taken to prevent fire and
explosion.
CAUTION: Before disconnecting or removing components, ensure the area around the joint faces and connections are clean. Plug open
connections to prevent contamination.
^
Release the clip.
^
Position an absorbent cloth to collect fluid spillage.
10. Remove the ignition coil-on-plug.
11. Remove the remaining ignition coil-on-plugs.
12. Release the engine wiring harness.
^
Release the 4 clips.
13. Disconnect the variable camshaft timing (VCT) oil solenoid electrical connector.
14. Disconnect the valve cover breather hose.
