Range Rover (LM) V8-4.4L (2009)
5. Install the valve cover retaining bolts.
^
Install valve cover retaining bolts to their position previously noted.
^
Tighten the bolts to 12 Nm (9 ft. lbs.).
^
Complete the tightening sequence as illustrated.
6. Connect the VCT oil solenoid electrical connector.
7. Install the ignition coil-on-plugs.
8. Install the remaining ignition coil-on-plugs.
9. Install the engine wiring harness.
^
Secure the clips.
^
Install the engine cover mounting bracket.
^
Tighten the nuts to 6 Nm (4 ft. lbs.).
10. Connect the PCV line.
11. Connect the battery ground cable.